软路由配置过程中（network）

软件源配置

官方软件源配置

确认路由架构

uname -a

以x86为例添加镜像源

vi /etc/opkg/distfeeds.conf

src/gz openwrt_core https://mirrors.tencent.com/lede/releases/24.10.5/targets/x86/64/packages
src/gz openwrt_base https://mirrors.tencent.com/lede/releases/24.10.5/packages/x86_64/base
src/gz openwrt_luci https://mirrors.tencent.com/lede/releases/18.06.9/packages/x86_64/luci
src/gz openwrt_packages https://mirrors.tencent.com/lede/releases/24.10.5/packages/x86_64/packages   
src/gz openwrt_routing https://mirrors.tencent.com/lede/releases/24.10.5/packages/x86_64/routing
src/gz openwrt_telephony https://mirrors.tencent.com/lede/releases/24.10.5/packages/x86_64/telephony  

保存后执行

opkg update

自定义openwrt软件源配置

推荐使用op.dllkids.xyz/openwrt-feed-README.txt

通过修改 etc/opkg/customfeeds.conf 文件实现

配置前确保软件源与路由架构一致

cat /etc/openwrt_release

同时可以使用https避免缓存劫持，安装以下依赖

opkg install libustream-openssl ca-bundle ca-certificates

手动导入软件源

确定设备架构

uname -a

vi /etc/opkg/customfeeds.conf

脚本导入

使用源提供的脚本(一般都有提供

wget -qO- https://down.dllkids.xyz/openwrt-feed/openwrt-feed-setup.sh | sh

不要忘记

opkg update

可以查询包名

opkg list | grep -i 关键词

passwall 与 adblock 的dns冲突